vishay il440 document number 83631 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 1 i179035 1 2 3 6 5 4 mt2 mt1 nc a c nc pb p b -free e3 optocoupler, phototriac output, low input current features ? 400 and 600 v blocking voltage 5.0 ma maximum trigger current isolation test voltage, 5300 v rms , t = 1.0 sec. isolation materials per ul94 pin compatible with optocouplers il440-1 moc 3051 il440-2 moc 3052 il440-3 moc3053 il440-4 moc 3021 il440-5 moc 3022 il440-6 moc 3023 lead-free component component in accordance to rohs 2002/95/ec and weee 2002/96/ec agency approvals ul1577, file no. e52744 system code h or j, double protection csa 93751 din en 60747-5-2 (vde0884) din en 60747-5-5 pending available with option 1 babt/ bsi iec60950 iec60065 applications high current triac driver solid state relay switch small ac loads description the il440 consists of a gaas infrared emitter opti- cally coupled to a silicon pl anar triac chip with a non- zero crossing network. the two semiconductors are assembled in a 6 pin dual-in-line plastic package. the output detector il440-1, 2, 3 is capable of blocking up to 600 volts which permits control of off-line voltages up to 240 vac. the il440 can handle currents up to 100 ma rms. order information for additional information on t he available options refer to option information. part remarks il440-1 15 ma i ft , 600 v v drm , dip-6 il440-2 10 ma i ft , 600 v v drm , dip-6 il440-3 5.0 ma i ft , 600 v v drm , dip-6 il440-4 15 ma i ft , 400 v v drm , dip-6 il440-5 10 ma i ft , 400 v v drm , dip-6 il440-6 5.0 ma i ft , 400 v v drm , dip-6 il440-1x009 15 ma i ft , 600 v v drm , smd-6 (option 9) il440-2x006 10 ma i ft , 600 v v drm , dip-6 400 mil (option 6) il440-3x007 5.0 ma i ft , 600 v v drm , smd-6 (option 7) il440-3x009 5.0 ma i ft , 600 v v drm , smd-6 (option 9) il440-4x007 15 ma i ft , 400 v v drm , smd-6 (option 7) il440-4x009 15 ma i ft , 400 v v drm , smd-6 (option 9) il440-5x006 10 ma i ft , 400 v v drm , dip-6 400 mil (option 6) il440-5x009 10 ma i ft , 400 v v drm , smd-6 (option 9) il440-6x006 5.0 ma i ft , 400 v v drm , dip-6 400 mil (option 6) il440-6x007 5.0 ma i ft , 400 v v drm , smd-6 (option 7) il440-6x009 5.0 ma i ft , 400 v v drm , smd-6 (option 9)
www.vishay.com 2 document number 83631 rev. 1.5, 26-oct-04 vishay il440 vishay semiconductors absolute maximum ratings t amb = 25 c, unless otherwise specified stresses in excess of the absolute maximum ratings can caus e permanent damage to the device. f unctional operation of the device is not implied at these or any other conditions in excess of those given in the operati onal sections of this document. exposure to absolute maximum rating for extended periods of the time can adversely affect reliability. input output coupler parameter test condition symbol value unit reverse voltage v r 5.0 v forward current i f 60 ma surge current p.w. < 10 si fsm 3.0 a power dissipation p diss 100 mw junction temperature t j 100 c parameter test condition part symbol value unit peak off-state voltage il440-1 v drm 600 v il440-2 v drm 600 v il440-3 v drm 600 v il440-4 v drm 400 v il440-5 v drm 400 v il440-6 v drm 400 v on-state rms current i d(rms) 100 ma peak surge current t p 10 ms i fsm 1.2 a peak on-state current t p /t = 0.01 100 si drm 2.0 a power dissipation p diss 300 mw junction temperature t j 125 c parameter test condition symbol value unit isolation voltage, 1.0 sec., per standard climate 23 c/50 % rh, din 50014 v iso 5300 v rms creepage 7.0 mm clearance 7.0 mm isolation resistance v io = 500 v, t amb = 25 c r io 10 12 ? v io = 500 v, t amb = 100 c r io 10 11 ? total power dissipation p tot 330 mw storage temperature range t stg - 55 to + 125 c ambient temperature t amb - 40 to + 100 c junction temperature t j 100 c lead soldering temperature 2.0 mm from case, t < 10 s t sld 260 c
vishay il440 document number 83631 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 3 electrical characteristics t amb = 25 c, unless otherwise specified minimum and maximum values are testing requirements. typical val ues are characteristics of the device and are the result of eng ineering evaluation. typical values are for information only and are not part of the testing requirements. input output off- state output terminal voltage (see table 1.) i ft and blocking voltage selection 1) 1) test voltage must be applied within dv/dt rating of 0.13 v/ sec. coupler maximum safety ratings (according to din en 60747-5-2(vde0884)/ din en 60747-5-5 pending) see figure 1 this optocoupler is suitable for safe electric al isolation only within the safety ratings. compliance with the safety ratings shall be ens ured by means of suitable protective circuits. input the device is used for protective separati on agains electrical shock within the maxi mum safety ratings. this must be ensured by protective circuits in the applications. output parameter test condition symbol min ty p. max unit forward voltage i f = 50 ma v f 1.25 v reverse voltage i r = 10 av r 5.0 v junction capacitance v r = 0 v, f = 1.0 mhz c j 50 pf parameter test condition symbol min ty p. max unit peak on-state voltage i tm = 100 ma, i ft = 30 ma v tm 1.5 3.0 v critical rate of rise of off-state voltage i f = 0, v s = 240 v rms dv cr /dt 50 v/ s i f = 30 ma, v s = 60 v rms dv crq /dt 0.13 0.25 v/ s bin number bv (volts) max @ i drm = 500 na i ft max @ v t = 6 v, r l =150 ? il440-1 600 15 il440-2 600 10 il440-3 600 5.0 il440-4 400 15 il440-5 400 10 il440-6 400 5.0 parameter test condition symbol min ty p. max unit holding current i f 10 ma, v s 3.0 v i h 1.0 ma parameter test condition symbol min ty p. max unit forward voltage i s, input 130 ma parameter test condition symbol min ty p. max unit power dissipation p s, output 300 mw
www.vishay.com 4 document number 83631 rev. 1.5, 26-oct-04 vishay il440 vishay semiconductors package dimensions in inches (mm) i178004 .010 (.25) typ. .114 (2.90) .130 (3.0) .130 (3.30) .150 (3.81) .031 (0.80) min. .300 (7.62) typ. .031 (0.80) .035 (0.90) .100 (2.54) typ. .039 (1.00) min. .018 (0.45) .022 (0.55) .048 (0.45) .022 (0.55) .248 (6.30) .256 (6.50) .335 (8.50) .343 (8.70) pin one id 6 5 4 1 2 3 18 3C9 .300C.347 (7.62C8.81) 4 typ. iso method a min. .315 (8.00) .020 (.51) .040 (1.02) .300 (7.62) ref. .375 (9.53) .395 (10.03) .012 (.30) typ. .0040 (.102) .0098 (.249) 15 max. option 9 .014 (0.35) .010 (0.25) .400 (10.16) .430 (10.92) .307 (7.8) .291 (7.4) .407 (10.36) .391 (9.96) option 6 .315 (8.0) min. .300 (7.62) typ . .180 (4.6) .160 (4.1) .331 (8.4) min. .406 (10.3) max. .028 (0.7) min. option 7 18450
vishay il440 document number 83631 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 5 ozone depleting subst ances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performanc e of our products, processes, distribution and operatingsystems with respect to their impact on the hea lth and safety of our empl oyees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the cl ean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semi conductors are not manufactured with ozone depleting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of , directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany telephone: 49 (0)7131 67 2831, fax number: 49 (0)7131 67 2423
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
